8 restoring default parameters – MRV Communications EM316EDFA-BR User Manual
Page 42
Fiber Driver
®
EM316EDFA User Guide
P/N 1294008-001 Rev D2
33
5.2.8 Restoring Default Parameters
Use the default command to discard changes applied to the module configuration. The
example below illustrates returning the entire module to the original factory defaults. Use the “?”
after the default command or refer to EM316LNXNM-OT documentation for parameters to
reapply only selected default values including individual port settings.
The command below is applied in the main configuration context. The first command line in the
box opens this context from the login context.
fiberdriver(config)# default 1 all
Restored default configuration for 1
Restored default configuration for 1.1
Restored default configuration for 1.2
Restored default configuration for 1.2.1
Restored default configuration for 1.2.2
Restored default configuration for 1.2.3
Restored default configuration for 1.2.4
Restored default configuration for 1.3
Restored default configuration for 1.3.1
Restored default configuration for 1.3.2
Restored default configuration for 1.4
Restored default configuration for 1.5
Restored default configuration for 1.5.1
Restored default configuration for 1.5.2
Restored default configuration for 1.5.3
Restored default configuration for 1.5.4
Restored default configuration for 1.5.5
Restored default configuration for 1.6
Restored default configuration for 1.6.1
Restored default configuration for 1.6.2
Restored default configuration for 1.6.3
Restored default configuration for 1.6.4
Restored default configuration for 1.6.5
Restored default configuration for 1.6.6
Restored default configuration for 1.6.7
Restored default configuration for 1.6.8
Restored default configuration for 1.6.9
Restored default configuration for 1.6.10
Restored default configuration for 1.7
Restored default configuration for 1.7.1
Restored default configuration for 1.7.2
Restored default configuration for 1.7.3
Restored default configuration for 1.7.4
Restored default configuration for 1.8
Restored default configuration for 1.8.1
Restored default configuration for 1.8.2
Restored default configuration for 1.9
Restored default configuration for 1.10
Restored default configuration for 1.11
Restored default configuration for 1.12
Restored default configuration for 1.13
Restored default configuration for 1.14
Restored default configuration for 1.15
Restored default configuration for 1.16
fiberdriver(config)#