Miller Electric Blu-Fab 3500 - Manual (Page 9)

OM-221 677 Page 5
SECTION 2 − DEFINITIONS
Warning! Watch Out! There are possible
hazards as shown by the symbols.
1
Electric shock can kill.
1.1 Wear dry insulating gloves. Do not
touch electrode with bare hand. Do
not wear wet or damaged gloves.
1.2 Protect yourself from electric shock
by insulating yourself from work and
ground.
1.3 Disconnect input plug or power
before working on machine.
2 Breathing welding fumes can be
hazardous to your health.
2.1 Keep your head out of the fumes.
2.2 Use forced ventilation or local
exhaust to remove the fumes.
2.3 Use ventilating fan to remove fumes.
3
Welding sparks can cause explosion
or fire.
3.1 Keep flammables away from welding.
Do not weld near flammables.
3.2 Welding sparks can cause fires.
Have a fire extinguisher nearby, and
have a watchperson ready to use it.
3.3 Do not weld on drums or any closed
containers.
4 Arc rays can burn eyes and injure
skin.
4.1 Wear hat and safety glasses. Use
ear protection and button shirt collar.
Use welding helmet with correct
shade of filter. Wear complete body
protection.
5 Become trained and read the
instructions before working on the
machine or welding.
6 Do not remove or paint over (cover)
the label.
Do not discard this product with
general waste.
Reuse or recycle Waste Electrical
and Electronic Equipment (WEEE)
by disposing at a designated collec-
tion facility.
Contact your local recycling office
or your local distributor for further
information.