8. changing cable between wire feeder and xms 4000, 9. installing wheels on wire feeder (optional) – Miller Electric XMS 44 User Manual
Page 14
Advertising
OM-223 839 Page 10
3-8. Changing Cable Between Wire Feeder and XMS 4000
Y Disconnect power before
changing cables.
1
Access Door
2
Clamp
3
Plastic Collar
Connect weld cable to terminals be-
hind access door.
Remove screws securing door,
clamp and collar. Make cable con-
nections. Reinstall clamp, collar,
and door.
3
3
2
1
Tools Needed:
3-9. Installing Wheels On Wire Feeder (Optional)
1
Wheels
2
Bars
3
Screws
Remove rubber feet from wire feeder.
Install only wheels on feeder if smaller
dimensions are desired, unit will be
used on level floors, or if optional turn-
table is used.
Install wheels and bars for increased
stability on uneven floors.
1
3
1
Tools Needed:
Advertising