Miller Electric XMS 44 - Manual (Page 9)

OM-223 839 Page 5
SECTION 2 − DEFINITIONS
2-1. Manufacturer’s Warning Label Definitions
1 1.1 1.2 1.3
3 3.1 3.2 3.3
4 4.1
+
2 2.1 2.2
+
+
5 6
+
2.3
S-178 936
1. Warning! Watch Out! There are
possible hazards as shown by the
symbols.
2. Drive rolls can injure fingers
3. Welding wire and drive parts are at
welding voltage during operation −
keep hands and metal objects clear.
1 Electric shock can kill.
1.1 Wear dry insulating gloves. Do not
touch electrode with bare hand. Do
not wear wet or damaged gloves.
1.2 Protect yourself from electric shock by
insulating yourself from work and
ground.
1.3 Disconnect input plug or power before
working on machine.
2 Breathing welding fumes can be
hazardous to your health.
2.1 Keep your head out of the fumes.
2.2 Use forced ventilation or local exhaust
to remove the fumes.
2.3 Use ventilating fan to remove fumes.
3
Welding sparks can cause explosion
or fire.
3.1 Keep flammables away from welding.
Don’t weld near flammables.
3.2 Welding sparks can cause fires. Have
a fire extinguisher nearby and have a
watch person ready to use it.
3.3 Do not weld on drums or any closed
containers.
4 Arc rays can burn eyes and injure
skin.
4.1 Wear hat and safety glasses. Use ear
protection and button shirt collar. Use
welding helmet with correct shade of
filter. Wear complete body protection.
5 Become trained and read the
instructions before working on the
machine or welding.
6 Do not remove or paint over (cover)
the label.
A B C
Do not discard this product with
general waste.
Reuse or recycle Waste Electrical
and Electronic Equipment (WEEE)
by disposing at a designated collec-
tion facility.
Contact your local recycling office
or your local distributor for further
information.