Muratec F-320 - Manual (Page 22)

1.11
Getting started
Searching the functions using the cursor key
Even if you don’t remember the exact commands needed for an operation, you can
search for and enter almost all of your unit’s functions using the
MENU key, Cursor
key and the ENTER key.
Note: You can also search for any function with the function table (see pages
1.13 – 1.17). Keep a copy of this table nearby for reference.
To search and enter the function set-
tings:
1 Press MENU .
2 Search the level one function
groups using
or until
your desired item appears.
3 After you find the level one function item you want to program, press to go
to the level two function groups.
4 Search the level two function groups using or until your desired item
appears.
5 After you find the level two function item you want to program, press to go
to the level three function groups .
6 Search the level three function groups using or until your desired func-
tion appears.
7 Press ENTER to entry the function setting.
Note: You can go back to previous level function groups by pressing before you
have entered the level three function by pressing ENTER . If you want to go
back to previous level function group after entering the level three function,
press
BACK .
Note: Stop the operation at any time by pressing STOP .