Muratec F-320 - Manual (Page 88)

Advanced features
10 Press ENTER . The LCD now asks if you want to make additional settings for
this programmable one-touch number.
If you do not want to make additional settings, select “Off” and press ENTER .
Then skip to step 12.
If you do want to make additional settings, press
to select “On” and press
ENTER .
11 Follow steps 13–25 on page 3.34.
Note: “Memory Tx”, “Report” and “Cover Page” will not appear when you
program batch transmission.
12 Press STOP to return your machine to standby mode.
Programming printouts
You can program the operation for printing following lists into programmable one-
touch keys:
• Function list (page 1.13)
• User settings list (page 4.10)
• Activity journal (page 3.20)
• Delayed commands list (page 2.7)
• One-touch list (page 3.2)
• Speed-dial list (page 3.4)
• Programmable one-touch list (page 3.41)
• Group list (page 3.7)
• Blocked numbers list (page 3.46)
• Sample cover page (page 3.22)
• Department time list (page 3.48)
• List of F-Code boxes (page 3.28)
• List of documents stored in F-Code boxes (page 3.28)
• Batch box list (page 3.12)
• List of stored batch documents (page 3.12)
• Macros list (page 3.18)
To program a programmable one-touch key to print a list:
1 Press MENU , 3, 4, 1, ENTER . The LCD shows the first empty programmable one-
touch number available:
2 Press or to select the programmable one-touch key in which you want to
store or change.
If changing a previously stored command, skip to step 5.
Note: You can select the one-touch key by pressing that key on the control
panel.
Note: If your previous command for this key was a printing lists operation,
and you want to keep this key programmed for a printing lists opera-
tion, use these instructions to make changes. But if the previous
command for this key was a fax communication command or a docu-
ment storage operation, you must first erase the stored command
before programming the new one.
3 Press ENTER . The LCD asks which operation you want to program into the pro-
grammable one-touch:
4 Press or until “List Print” appears.
5 Press ENTER . The LCD asks which list you want to program into the program-
mable one-touch:
6 Press or until the list you want appears.
7 Press ENTER .
8 Press STOP to return your machine to standby mode.
58:Machine Settings
$ $
/
# #
/Enter
Type :List Print
$ $
/
# #
/Enter
Type :Communication
$ $
/
# #
/Enter
Select Program No.
58:No Number Stored
Option :Off
$ $
/
# #
/Enter
3.39