Muratec F-320 - Manual (Page 44)

2.11
Basic operation
Guidelines
Before you begin making copies, please read the following guidelines.
Acceptable document sizes
You can set up to 80 sheets of letter-sized document in the ADF at one time.
The acceptable document sizes for coping are same as for faxing. Refer to page 2.1.
Scanning width
The scanning width when you make copies is 8.5 inches, no matter the document
size.
Note: If the document size is Letter, for example, the scanning area will be as
follows:
Printing margin
The machine does not print approx. 0.12 inches on each side of the paper.
How to make copies
Your fax machine also doubles as a convenient copier.
1 Press COPY to change to Copy mode.
When the machine is in the Copy mode, the LCD shows:
2 Place your original document in ADF face up just as you would sending a fax.
3 As needed, set the following:
• Adjust document mode and contrast
• Enter the number of copies
4 Press START to start the copying.
Note: When you make multiple copies, your machine always sort copies.
Note: To stop the copying, press STOP .
Changing the reduction ratio
Your fax machine is capable of reduction when copying. You can choose from
78% (Legal
→
Letter), 100% and Auto.
Note: If the “Auto” is set, the machine automatically reduce the original document
size to fit on the paper size, which makes the margin as little as possible.
To change the reduction ratio:
1 Press MENU , 2, 3, 2, ENTER .
2 Press or until your desired ratio appears.
3 Press ENTER to save the setting.
4 Press STOP to return to the standby mode.
Prt Reduc. Rate:100%
$ $
/
# #
/Enter
# Of Pgs. To Copy 01
Fine
Feed direction
Making copies