Muratec F-320 - Manual (Page 95)

Advanced features
2 Press or until the mode you want appears.
3 Press ENTER to save the setting.
What you do next depends on what you selected in step 1:
• If you selected Off or Mode1, press
STOP to return to standby mode.
• If you selected either Mode2 or Mode3, go on to step 4.
4 The LCD shows:
5 If you want to modify an existing entry in the blocked numbers list, press
or
until you see the number you want to modify.
… or …
If you want to enter a new number in an already-started blocked numbers
list, press
or until you find an empty position in the list.
Then press ENTER to enter or modify the blocked number.
Note: To clear a number from the list, see “Clearing a number from the
blocked numbers list,” right column.
6 Use the numeric keypad to enter the last eight characters of a fax number you
want to block. For example, if you want to block a fax from someone with a
Subscriber
ID of 972-555-3038, you should enter 5, 5, 5, DIALING OPTIONS , 3, 0,
3, 8:
To change a specific digit, press to move left or to move right until the
cursor is under the digit, then use the numeric keypad to enter the correct
number.
7 Press ENTER to save the setting. The LCD shows the next “slot” in the blocked
numbers list.
If you do not want to enter or change a number for this slot, go on to step 8.
If you do want to enter or change a number for this slot, repeat steps 5–7.
8 Press STOP . Your machine will return to standby mode.
Clearing a number from the blocked numbers list
To clear a number from the list:
1 Press MENU , 2, 2, 1, 0, ENTER . The LCD will show:
2 Press ENTER . The LCD shows:
3 Press or until you see the number you want to clear.
4 Press CANCEL to clear the number.
To clear another number from the blocked numbers list, repeat steps 3–4.
Otherwise, go on to step 5.
5 Press STOP to return your machine to standby mode.
Printing a list of the blocked numbers
Forgot which number is stored in the blocked number list? Just print a list of the
blocked numbers.
To print a list of the blocked numbers, press
MENU , 5, 1, 0, 8, ENTER .
Select BlockJunk No.
01:555-2971
Block Junk Fax:Mode2
$ $
/
# #
/Enter
Enter Fax Number
01:555-3038_
Enter Fax Number
01:_
3.46