Muratec F-320 User Manual
Page 40
2.7
Basic operation
3
If you want to cancel the command shown, press
CANCEL
. The following two
displays will appear alternately:
4
To go ahead with canceling the command, press
CANCEL
. Go back to step 2 to
view other delayed commands.
To keep this command but to continue reviewing stored commands, press
BACK
. Go back to step 2.
To keep this command and stop reviewing commands, press
STOP
to return
your machine to standby mode.
Reviewing or canceling parts of a broadcast
You also can review or cancel certain numbers within a broadcast:
1
Press
COMM
.
CANCEL
/
CONFIRM
..
2
Press
or
to scroll through currently stored broadcast command.
3
When the command you want to cancel shown, skip to step 6.
If you want to review individual numbers within this broadcast, go on to step
4 without pressing
CANCEL
.
4
To review individual numbers within this broadcast, press
to see the first
number. The
LCD
shows:
5
Press
or
until you find the number you want to cancel.
6
Press
CANCEL
,
CANCEL
. The next number will appear.
If you want to cancel this number, also, repeat this step.
If you want to cancel a different number, go back to step 5.
If you want to go back to reviewing or canceling other command, press .
If you don’t want to cancel any more numbers, press
STOP
. The machine
returns to standby mode.
Printing a delayed command list
Your machine can print a command list which tells you:
• The command’s identification number
• The phone number, or “remote location”
• The start time (this appears in a
DD
,
HH
:
MM
format)
• A “note” telling if the command is a polling or F-Code operation (see pages 3.14
for more on polling and 3.24–3.32 for more on F-Code communication).
To print a delayed command list, press
MENU
, 5, 1, 0, 4
ENTER
.
Printing a stored document
Your fax machine can print out each document stored for delayed transmission.
To print a stored document, you’ll need to know the document’s command number,
which you can get by either reviewing the commands or printing a delayed com-
mand list (see above).
1
Press
MENU
, 4, 3, 5
ENTER
. The
LCD
shows:
2
Use the numeric keypad to enter the command’s identification number, 1–99.
3
Press
ENTER
. Your fax machine will print a copy of the stored document.
View the result of fax transaction
You can see 70 most recent fax transactions and result of each transactions with the
following information.
• Assigned number, starting each day at 001
• Remote location called (The destination name)
• Starting date and time
• Result of the call — If preceded by an asterisk (*), this signifies an
ECM
commu-
nication. If preceded by a pound (#), this signifies communication was via the
highspeed V.34 modem.
Note: Your machine’s
LCD
shortens the word Transmission to Tx and the Reception
to Rx.
Comm. Stored Doc.
Command No. :_
9-5550388
$
$
/
#
#
/
!
!
/Cancel
C01:Broadcast
$
$
/
#
#
/
"
"
/Cancel
C01:5552009
No
→
→
Back
C01:5552009
Yes
→
→
Cancel