Multi-Tech Systems MTS2SA-T - Manual (Page 41)

Chapter 4 – Command Line Interface (CLI)
Multi-Tech Systems, Inc. MultiConnect Serial-to-Serial Adapter User Guide (S000354A) 41
Serial Commands – Show
Command Syntax show serial [s0/s1] statistics
Description Displays Serial Statistics.
•
Status (If serial is used by any application)
•
Rx Bytes
•
Rx Errors
•
Tx Bytes
•
Tx Errors
•
Status of EIA signals (CTS, DSR, DCD, RTS, DTR).
Important Note: Serial statistics are only for the current session. Rx
Bytes, Tx Bytes will be reset for every session opened on the serial.
Default Value -
Success OK
Error 1. Too few arguments
Possible value(s) are
statistics modem-configuration
configuration chat-script
Command Syntax show serial modem country code
This command is supported on S1 only.
Description Displays the supported country codes for this product.
Default Value -
Success OK
Error 1. Too few arguments
Possible value(s) are
statistics modem-configuration chat-script
configuration country-code