Multi-Tech Systems MTS2SA-T - Manual (Page 50)

Chapter 4 – Command Line Interface (CLI)
Multi-Tech Systems, Inc. MultiConnect Serial-to-Serial Adapter User Guide (S000354A) 50
SMTP Client Commands – Setup
Command Syntax set send-mail to-address <n> <email-address> where n = 1 to 5.
Description Sets the email-address as one of the primary addressee. This is the default
email address to which email messages are sent.
Default Value NULL
Success OK
Error 1. Too few arguments
“Usage: set send-mail to-address <n> <email-address>
Type 'set send-mail to-address <n> ?' for more information”
2. Invalid to-address number
“ERROR: to-address numbers supported: [1 to 5]
Type 'set send-mail to-address <n> ?' for more information”
Command Syntax set send-mail cc-address <n> <email-address> where n = 1 to 5.
Description Sets the email-address as the alternate addressee (carbon copy). This is
the default email address that the primary addressee's email messages are
copied.
Default Value NULL
Success OK
Error 1. Too few arguments
“Usage: set send-mail cc-address <n> <email-address>
Type 'set send-mail cc-address <n> ?' for more information”
2. Invalid to-address number
“ERROR: cc-address numbers supported: [1 to 5]
Type 'set send-mail cc-address <n> ?' for more information”
Command Syntax set send-mail reply-to-address <email-address>
Description Sets the email address to be used when the recipient uses the reply-to
button.
Default Value NULL
Success OK
Error 1. Too few arguments
“Usage: set send-mail reply-to-address <email-address>
Type 'set send-mail reply-to-address ?' for more information”
Command Syntax set send-mail subject <data>
Description Sets the email header subject field to the given data.
Default Value NULL
Success OK
Error 1. Too few arguments
“Usage: set send-mail subject <data>
Type 'set send-mail subject ?' for more information”