Multi-Tech Systems MTS2SA-T - Manual (Page 52)

Chapter 4 – Command Line Interface (CLI)
Multi-Tech Systems, Inc. MultiConnect Serial-to-Serial Adapter User Guide (S000354A) 52
POP3 Client Commands – Setup
POP3 Client Commands
Command Syntax set recv-mail server-name <server-name>
Description This parameter is set by the host to establish the POP3 connection for
receiving the email from the remote server. This also needs DNS to be
enabled on the MultiConnect IP.
Default Value None
Success OK
Error 1. Too few arguments
Usage: set recv-mail server-name <server-name>
Type 'set recv-mail server-name ?' for more information
2. Invalid string
Type 'set recv-mail server-name ?' for more information
Command Syntax set recv-mail server-port <server-port>
Description This parameter is set by the host to establish the POP3 connection for
receiving email from the remote server.
Default Value 110
Success OK
Error 1. Too few arguments
Usage: set recv-mail server-port <server-port>
Type 'set recv-mail server-port ?' for more information
2. Invalid string
Type 'set recv-mail server-port ?' for more information
Command Syntax set recv-mail mailbox-name <mailbox-name>
Description Sets the mail box user name for POP3 server authentication.
Default Value None
Success OK
Error 1. Too few arguments
Usage: set recv-mail mailbox-name <mailbox-name>
Type 'set recv-mail mailbox-name ?' for more information
2. Invalid string
Type 'set recv-mail mailbox-name ?' for more information
Command Syntax set recv-mail mailbox-password <mailbox-password>
Description Sets the mail box password for POP3 server authentication.
Default Value None
Success OK
Error 1. Too few arguments
Usage: set recv-mail mailbox-password <mailbox-password>
Type 'set recv-mail mailbox-password ?' for more information
2. Invalid string
Type 'set recv-mail mailbox-password ?' for more information