Mercedes-Benz 2005 E 320 - Manual (Page 127)

126
Controls in detail
Seats
Removing and installing front seat
head restraints
For more information on head restraint
adjustment, see the “Getting started”
section (
୴ page 40).
Front seat head restraints
Removing front head restraints
̈ Press switch 1 upwards and hold until
the head restraint is fully extended.
̈ Pull out head restraint.
Installing front head restraints:
̈ Press switch 1 upwards and hold for
about five seconds.
̈ Push the head restraint down until it
engages.
̈ Adjust head restraint to desired posi-
tion (
୴ page 40).
Warning!
G
For your protection, drive only with properly
positioned head restraints.
Adjust head restraint so that the center of
the head restraint supports the back of the
head at eye level. This will reduce the poten-
tial for injury to the head and neck in the
event of an accident or similar situation.
Do not drive the vehicle without the seat
head restraints. Head restraints are intend-
ed to help reduce injuries during an acci-
dent.
Do not interchange head restraints from
front and rear seat.
i
Tilt the backrest to the rear for easier
removal and installation of the head re-
straints.