Mercedes-Benz 2005 E 320 - Manual (Page 414)

413
Practical hints
Replacing bulbs
Replacing bulbs for front lamps
1 Bulb socket for high beam head-
lamp/high beam flasher bulb
2 Bulb socket for parking and standing
lamp bulb
3 Housing cover for low
beam/Bi-Xenon* headlamp
4 Bulb socket for turn signal lamp bulb
5 Electrical connector for high beam
headlamp/high beam flasher bulb
6 Bulb socket for parking and standing
lamp bulb
7 Electrical connector for low beam
headlamp bulb (halogen headlamps
only)
Before you start to replace a bulb for a
front lamp, do the following first:
̈ Turn the exterior lamp switch to
position
M ( ୴ page 141).
̈ Open the hood ( ୴ page 299) (except
for side marker lamps).
Warning!
G
Do not remove the cover 3 for the
Bi-Xenon* headlamp. Because of high
voltage in Xenon* lamps, it is dangerous to
replace the bulb or repair the lamp and its
components. We recommend that you have
such work done by a qualified technician.