Mercedes-Benz 2005 E 320 - Manual (Page 232)

231
Controls in detail
Driving systems
Setting a higher speed
̈ Lift cruise control lever to position 1
and hold it up until the desired speed is
reached.
̈ Release cruise control lever.
The new speed is set.
Setting a lower speed
̈ Depress cruise control lever to
position
2 and hold it down until the
desired speed is reached.
̈ Release cruise control lever.
The new speed is set.
Fine adjustment in 1 mph
(Canada: 1 km /h) increments
Faster
̈ Briefly tip cruise control lever in the di-
rection of arrow
1.
Slower
̈ Briefly tip cruise control lever in the di-
rection of arrow
2.
Setting to last stored speed
(“Resume” function)
̈ Briefly push cruise control lever to
position
4.
The cruise control resume the last set
speed.
̈ Remove your foot from the accelerator
pedal.
The selected speed appears in the multi-
function display for approximately five sec-
onds, and the corresponding speedometer
segments from the selected speed to the
vehicle maximum speed are illuminated.
i
Depressing the accelerator pedal does
not deactivate cruise control. After
brief acceleration (e.g. for passing),
cruise control will resume the last
speed set.
i
E 320, E 500:
When you use the cruise control lever
to decelerate, the brake system will au-
tomatically brake the vehicle if the en-
gine’s braking power does not brake
the vehicle sufficiently.
E 320 4MATIC, E 500 4MATIC:
When you use the cruise control lever
to decelerate, the transmission will au-
tomatically downshift if the engine’s
braking power does not brake the vehi-
cle sufficiently.
Warning!
G
The speed stored in memory should only be
set again if prevailing road conditions per-
mit. Possible acceleration or deceleration
differences arising from returning to preset
speed could cause an accident and/or seri-
ous injury to you and others.