Mercedes-Benz 2005 E 320 - Manual (Page 415)

414
Practical hints
Replacing bulbs
Low beam bulb (halogen headlamps
only)
̈ Turn housing cover 3 counterclock-
wise and remove it.
̈ Pull electrical connector 7 off.
̈ Unclip the retainer spring on the bulb
socket and take out the bulb.
̈ Insert the new bulb so that its base lo-
cates in the recess on the lower left
and is level to it.
̈ Clip on the retainer spring.
̈ Plug electrical connector 7 onto the
bulb.
̈ Align housing cover 3 and turn it
clockwise.
High beam bulb/high beam flasher
bulb (halogen headlamps)/high beam
flasher bulb (Bi-Xenon* headlamps)
̈ Turn bulb socket 1 with the bulb
counterclockwise and remove it.
̈ Pull electrical connector 5 off.
̈ Press gently onto the bulb and turn
counterclockwise out of bulb
socket
1.
̈ Press the new bulb gently into bulb
socket
1 and turn clockwise until it
engages.
̈ Plug electrical connector 5 onto the
bulb.
̈ Place bulb socket 1 back into the
lamp and turn it clockwise.
Front turn signal lamp bulb
̈ Turn bulb socket 4 with the bulb
counterclockwise and remove it.
̈ Press gently onto the bulb and turn
counterclockwise out of bulb
socket
4.
̈ Press the new bulb gently into bulb
socket
4 and turn clockwise until it
engages.
̈ Place bulb socket 4 back into the
lamp and turn it clockwise.
Parking and standing lamp bulb
̈ Pull out bulb socket 6 with the bulb.
̈ Press gently onto the bulb and turn
counterclockwise out of bulb
socket
6.
̈ Press the new bulb gently into bulb
socket
6 and turn clockwise until it
engages.
̈ Press bulb socket 6 back into the
lamp.