Mercedes-Benz 2005 E 320 User Manual

Page 129

Advertising
background image

128

Controls in detail

Seats

Placing head restraints upright

̈

Pull the head restraint forward until it
locks into position.

Head restraint height (rear outer seats)

1 Release button

Raising:

̈

Manually adjust the height of the head
restraint by pulling it upward.

If the head restraint is fully retracted,
push release button

1 and pull the

head restraint out.

Lowering:

̈

To lower the head restraint, push
release button

1 and push down on

the head restraint.

!

Make sure the head restraints engage
when placing them upright. Otherwise
their protective function cannot be as-
sured.

Warning!

G

For your protection, drive only with properly

positioned head restraints.

Adjust head restraint so that the head

restraint supports the back of the head at

eye level. This will reduce the potential for

injury to the head and neck in the event of

an accident or similar situation.

Do not drive the vehicle without the seat

head restraints. Head restraints are

intended to help reduce injuries during an

accident.

Advertising
This manual is related to the following products: