Mercedes-Benz 2005 E 320 - Manual (Page 130)

129
Controls in detail
Seats
Head restraint tilt (rear outer seats)
Two different head restraint angle
positions are available.
1 Release button
̈ Press the release button 1 and tilt the
head restraint to the desired position.
Removing and installing rear seat head
restraints
1 Release button
Removing rear seat head restraints
̈ Fold back head restraint ( ୴ page 127).
̈ Pull head restraint to its highest
position.
̈ Push release button 1 and pull out
head restraint.
Warning!
G
For your protection, drive only with properly
positioned head restraints.
Adjust head restraint so that the head re-
straint supports the back of the head at eye
level. This will reduce the potential for injury
to the head and neck in the event of an ac-
cident or similar situation.
Do not drive the vehicle without the seat
head restraints. Head restraints are intend-
ed to help reduce injuries during an acci-
dent.
Do not interchange head restraints from
front and rear seat.