Mercedes-Benz 2005 E 320 - Manual (Page 154)

153
Controls in detail
Control system
̄ Control system
The control system is activated as soon as
the SmartKey in the starter switch is
turned to position 1 or as soon as the
KEYLESS-GO start/stop button* is in
position 1. The control system enables you
to:
ț call up information about your vehicle
ț change vehicle settings.
For example, you can use the control sys-
tem to find out when your vehicle is next
due for service, to set the language for
messages in the instrument cluster dis-
play, and much more.
The control system relays information to
the multifunction display.
Multifunction display
1 Outside temperature
2 Trip odometer
3 Automatic transmission program mode
4 Main odometer
5 Current gear selector lever position
Above illustration shows the standard dis-
play.
For more information on menus displayed
in the multifunction display, see “Menus”
(
୴ page 156).
i
The displays for the audio systems (ra-
dio, CD player) will appear in English,
regardless of the language selected.
Warning!
G
A driver’s attention to the road and traffic
conditions must always be his/her primary
focus when driving.
For your safety and the safety of others, se-
lecting features through the multifunction
steering wheel should only be done by the
driver when traffic and road conditions per-
mit it to be done safely.
Bear in mind that at a speed of just 30 mph
(approximately 50 km /h), your vehicle is
covering a distance of 44 feet (approximate-
ly 14 m) every second.