Motorola VC5090 - Manual (Page 109)

Wireless Applications 4 - 15
Password
Use the Password dialog box to enter a password. If EAP/TLS is the selected authentication type, the password is
not required and the field is disabled.
Figure 4-19 Password Dialog Box
1. Enter a password in the Password field.
2. Select the Advanced ID check box, if advanced identification is required.
3. Tap Next. The Encryption dialog box displays. See Encryption on page 4-16 .
Advanced Identity
Use the Advanced ID dialog box to enter the 802.1X identity to supply to the authenticator. This value can be 63
characters long and is case sensitive. In TTLS and PEAP, it is recommended entering the identity anonymous
(rather than a true identity) plus any desired realm (e.g., anonymous@myrealm). A user ID is required before
proceeding.
Figure 4-20 Advanced Identity Dialog Box
Tap Next . The Encryption dialog box displays.
NOTE When authenticating with a Microsoft IAS server, do not use advanced identity.