Waking the vehicle computer, Waking the vehicle computer -17 – Motorola VC5090 User Manual
Page 89
Operating the VC5090 3 - 17
Waking the Vehicle Computer
The wakeup conditions define what actions wakeup the vehicle computer after it has gone into suspend mode. The
vehicle computer can go into suspend mode by either pressing the Power button on the Quick Access Panel or
automatically by control panel timeout settings. Tap
>
Settings
>
Control
Panel
>
Power
icon >
Wakeup
tab.
These settings are configurable and the factory default settings are shown in
.
Table 3-5 Wakeup Default Settings
Condition for Wakeup
Power Button
Automatic TimeOut
AC power is applied.
No
Yes
Forklift Ignition turns on.
No
Yes
Forklift Ignition turns off.
No
No
VC5090 is connected to a serial device.
No
Yes
VC5090 is connected to a USB device.
No
Yes
VC5090 is disconnected from a USB device.
No
Yes
A key is pressed.
No
Yes
An attached scanner is triggered.
No
Yes
Screen is touched.
No
No
Wireless LAN activity is detected.
No
No
A headset is connected to the VC5090.
No
Yes