Motorola VC5090 - Manual (Page 74)

3 - 2 VC5090 Vehicle Computer Product Reference Guide
Power LED
Table 3-1 lists the states of the Power LED.
COMM LED
The COMM LED blinks to indicate WLAN radio activity. Table 3-2 lists the states of the COMM LED. By default, the
COMM LED is enabled. To disable the COMM LED:
1. Tap > Settings > Control Panel > VC5090 System Management icon. The System Management window
displays.
Figure 3-2 RF Settings Tab Window
2. Tap the Enable Comm Led check box.
3. Tap OK .
Table 3-1 Power LED Indicator
LED State Indication
Solid Green Vehicle computer is operating from external power.
Flashing Green UPS battery is charging.
Solid Yellow Vehicle computer is operating from the UPS battery.
Flashing Yellow Vehicle computer is operating from the UPS battery and the UPS battery power is low.
NOTE These settings are not persistent across a cold boot.
Table 3-2 COMM LED Indicator
LED State Indication
Fast Blinking (once every 0.4 seconds) Excellent WLAN signal.
Medium Blinking (once every 0.8 seconds) Very Good WLAN signal.