Using the keyboard, Using the keyboard -19 – Motorola VC5090 User Manual
Page 91
Operating the VC5090 3 - 19
3.
As the screen instructs, carefully touch and briefly hold on the center of each target that appears on the screen.
Repeat as the target moves around the screen.
4.
Tap the screen to accept the new calibration.
Using the Keyboard
If the present calibration does not allow you to use the touch screen, use the keyboard (or any standard USB
keyboard) to calibrate:
1.
Press
Ctrl
+
Esc
keys to access the
Start
menu.
2.
Using the arrow keys, select
Settings
>
Control Panel
.
3.
Press
Enter
to display the
Control Panel
window.
Figure 3-31
Control Panel Window
4.
Using the arrow keys, move to the
Stylus
icon and press
Enter
. The
Stylus Properties
window appears.
NOTE
If the calibration screen fails to respond, contact Support Central for assistance.