Metrologic Instruments Genesis MS7580 User Manual
Page 18
Advertising
14
W
ALL
M
OUNT
5. Use the locking plate as a guide to drill three #39 pilot holes (A) in the
mounting surface.
Figure 13. Locking Plate (Not Drawn to Scale)
6. Secure the locking plate to the wall with the three #7 wood screws ()
provided.
Figure 14
7. Position the unit so the base plate sits flush over the locking plate.
Twist the unit 90° counter-clockwise to lock the unit into place.
Figure 15
Advertising