Metrologic Instruments Genesis MS7580 - Manual (Page 5)

1
I
NTRODUCTION
Product Overview
The MS7580 Genesis™ is a high performance presentation area imaging bar
code scanner that utilizes high-resolution CMOS imaging sensors for superior
image quality. Genesis utilizes Omniplanar, Inc.’s Swiftdecoder™ software, for
reliable decoding of both 1D and 2D bar code symbologies. Sharp images can
be captured and transmitted in a variety of outputs including: .jpg, .bmp, and .tiff.
Omnidirectional scanning capabilities and an excellent motion tolerance provides
aggressive scanning of all standard 1D, GS1 DataBar™ (RSS), PDF417,
microPDF, Composite, Matrix and Postal Codes symbology types. Firmware
updates are easily loaded into Flash memory.
The MS7580 provides an extended scan volume and a built in object detection
sensor (IR) that instantly turns on the scanner when an object is presented within
the scanner’s field of view.
Genesis
™
Interface Support
MS7580 – 118
Interfaces supported include:
• RS232
• RS485
• USB
‹
• Keyboard Wedge
‹ USB is configurable for Keyboard Emulation Mode, Bi-Directional Serial Emulation
Mode or IBM OEM. The default USB setting is Keyboard Emulation Mode
Standard models ship with the ability to read all 1D, PDF and 2D bar
codes. Decoding and functional capability is limited and units will not
support key features including, but not limited to, the ability to decode
PDF, 2D or OCR fonts without proper limited use licenses provided
by Metrologic. If you wish to purchase a limited license for one or
more of the key features not included in the standard unit, please
specify at the time of sale or otherwise contact a Metrologic
representative for more information.