Metrologic Instruments Genesis MS7580 - Manual (Page 37)

33
S
CANNER AND
C
ABLE
T
ERMINATIONS
Scanner Pinout Connections
Figure 22. Back/Connector View of the MS7580
RS232 ‹ Keyboard Wedge ‹
Pin Function Pin Function
1 Signal/Power Ground 1 Signal/Power Ground
2 CTS/DTR Input 2 Tied to Pin 3 in Cable
3 RS232 Receive Input 3 Tied to Pin 2 in Cable
4 No Connect 4 PC Data
5 No Connect 5 PC Clock
6 RTS Output — 6 KB Clock
7 No Connect 7 +5VDC PC Keyboard Power
8 RS232 Transmit Output — 8 KB Data
9 Adapter Power 9 Adapter Power
10 Shield Ground 10 Shield Ground
SHELL Signal/Power Ground SHELL Signal/Power Ground
RS485 ‹ USB ‹‹
Pin Function Pin Function
1 Signal/Power Ground 1 Signal/Power Ground
2 Tied to Pin 6 in Cable 2 Tied to Pin 4 in Cable
3 No Connect 3 No Connect
4 IBM A+ 4 Tied to Pin 2 in Cable
5 IBM B- 5 No Connect
6 Tied to Pin 2 in Cable 6 USB D+
7 No Connect 7 +5VDC USB Power
8 No Connect 8 USB D-
9 Adapter Power 9 Adapter Power
10 Shield Ground 10 Shield Ground
SHELL Signal/Power Ground SHELL Signal/Power Ground
‹ RS485, RS232, and Keyboard Wedge interfaces require 12V power for operation.
‹ ‹ USB requires 12V power for pass-through functionality.
— Signals on Pin 6 and 8 are TTL level RS232 output signals.