Oven cooking, Canning and oversize cookware, Manual clean oven control using the touchpads – Maytag MAGIC CHEF CER3725AGW User Manual
Page 12: Setting the clock, Setting the timer
Canning and Oversize
All canners and large pots must have flat bottoms and
must be made from heavy-gauge materials. This is critical
on smoothtop surfaces. The base must not be more than
1 inch larger than the element.
When canners and pots do not meet these standards, cooking
times may be longer, and cooktops may be damaged.
Some canners are designed with smaller bases for use on
When canning, use the High heat setting only until the
water comes to a boil or pressure is reached in the canner.
Reduce to the lowest heat setting that maintains the boil or
pressure. If the heat is not turned down, the cooktop may be
Pans with grooved or warped bottoms.
Pans with uneven bottoms do not cook
efficiently and sometimes may not
Very thin-gauge metal or glass pans.
Pans that are the
Pans smaller or larger than the
same size as the
element by 1 inch.
Cookware with loose or broken handles.
Heavy handles that tilt the pan.
Woks with a ring-stand bottom.
Important: The display will show 12:00 when the appliance is
first connected to power or if power is interrupted. The Bake
and Broil indicators light when function is pressed.
Setting the Clock
1. Press the CLOCK pad.
• The clock time cannot be set if the control is
programmed for a bake, broil or timing operation.
2. Set the correct time of day using the
▲ or ▼ pads. If the ▲
▼ pad is not pressed within 30 seconds, the program
will cancel. Press the CLOCK pad and begin again.
Setting the Timer
The timer can be set from one minute (:01) up to 99 hours and
59 minutes (99:59). Time will be displayed in minutes and not
in seconds. THE TIMER DOES NOT CONTROL THE OVEN.
1. Press the TIMER pad.
• 0:00 will light and the colon (:) will flash in
2. Press the
▲ or ▼ pad until the desired time is
• The timer will begin as soon as the time is set.
• The flashing colon indicates that a timing
operation is in progress. (The colon will not
flash if the time of day or oven temperature is
• Two short beeps signal the end of the operation. “0:00”
will appear in the display.
• If desired, press the CLOCK pad and the time of day will
briefly reappear in the display during a timing operation.
Manual Clean Oven Control
Using the Touchpads
• Press the desired pad.
• Press the
▲ or ▼ pad to enter time or temperature.
• A beep will sound each time a function pad is pressed. There
is no beep for the
▲ or ▼ pad.
• A double beep will sound if a programming error occurs.
Use for baking and roasting.
Use for broiling and top browning.
Use to set time-of-day clock.
Cancels all operations except timer
▲ or ▼
Enters or changes time, oven
temperature. Sets HI or LO broil.
Important: Four seconds after pressing the
▲ or ▼ pad, the
time or temperature will automatically be entered. If more
than 30 seconds elapse between touching a function pad
▲ or ▼ pad, the function will be canceled and the
display will return to the previous display.
A B C D E F