McIntosh UR12 - Manual (Page 23)

23
System Settings
Edit Touch-buttons
Touch-buttons may be added or deleted,
change the Touch-button size and shape,
move the Touch-button locations (even to
other pages), creating a Favorite Device
Page and edit the Text on the Touch-but-
tons in the EDITING Mode.
1. Go into System Setting Mode by
pressing both the MAIN and PAGE
buttons simultaneously for five sec-
onds.
2. Move down the cursor in the Touch-
button Screen to 5. EDIT BUTTONS
using the joystick.
3. Push down the joystick to enter the
EDITING mode. The Touch Screen
will list the following six choices to
choose from and select the button you
wish to enter. Refer to figure 14.
Moving Touch Buttons
1. Set the cursor to COMMON BUTTON
and select the device you wish to enter.
Select the functional button you wish
to move in the device page and move
them with the joystick within the same
page or move to the next page by
pressing the PAGE button. Once you
position the button at the location or
press the MAIN button to exit to the
main menu.
Note: Preprogrammed code will be
automatically restored when
learned function is erased.
page you desire, push the joystick
down to save it.
2. Repeat the above step to continue to
move other buttons in the same device.
3. If you wish to move buttons in another
device, return to the main menu by
pressing the MAIN button and repeat
from STEP 1.
4. Once the operation is completed and
you wish to exit from this mode, return
to the main menu by pressing the
MAIN button and then exit from the
main menu by pressing both the
MAIN and PAGE buttons, simulta-
neously.
Note: You may first relocate or delete
the buttons that are currently at
the position you plan to locate the
new button. However, you can
also relocate or delete the buttons
after you superimpose the new
button above them. The Device
Figure 14