McIntosh UR12 - Manual (Page 7)

7
The remote control goes through self-test-
ing for three seconds after the batteries are
installed and automatically switches to
Setting Mode for programming. Refer to
figures 5 & 6.
1. Exit the System Setting Mode by sim-
ply pressing the MAIN push-button.
Initial Start-up
Initial Start-up
2. To start controlling McIntosh Compo-
nents, press the MAC Touch-button on
the MAIN LCD Screen.
Main
Push-button
Figure 5 Figure 6
MAC
Touch-Button
SYSTEM SETTING
1. TOUCH PAD ALIGNMENT
2. SYSTEMS & OPTIONS
3. PREPROGRAM
4. LEARNING
5. EDIT BUTTONS
6. SET DATE & CLOCK
7. PROGRAM LOADING
8. TO EXIT
SELECT : JOY STICK
ENTER : JOY STICK

—
‚