Statistics and logs, Networks – Multi-Tech Systems RF660 User Manual
Page 118
Chapter 6 – RouteFinder Software
Multi-Tech Systems, Inc. RouteFinderVPN RF760/660/600VPN User Guide (PN S000323D)
118
Statistics & Logs > Networks
Statistics and Logs
>
Networks
This menu displays an analysis of the RouteFinder network interface details, routing, and network connections.
Network Interface Cards
Click the Interface Details button to display the Interface details about all the interfaces (Ethernet, IPSec, PPP,
and local interfaces).
Routing Table
Click Routing Table to display the Kernel IP routing table of all entered routes. The information includes
Destination, Gateway, Genmask, Flags, Metric, Ref(Reference), and Use, Iface (User Interface).
Important Note:
Interface routes are inserted by the system and cannot be edited. Additional routes can be
added in Network Setup > Routes. This is an example of the Statistics & Logs Routing Table report.
How to Read the Table
Destination
The address of the target system.
Gateway
The address of the next-hop router.
Use Iface (User Interface)
Indicates the name of the local interface from which the packet is to be sent.