Multi-Tech Systems RF660 - Manual (Page 94)

Chapter 6 – RouteFinder Software
Multi-Tech Systems, Inc. RouteFinderVPN RF760/660/600VPN User Guide (PN S000323D) 94
DHCP Server > Subnet Settings
DHCP Server > Fixed Addresses
DHCP Server
DHCP Server > Subnet Settings
DHCP (Dynamic Host Configuration Protocol) is a protocol which allows individual devices on an IP network to get their own
network configuration information (IP address, subnetmask, broadcast address, etc.) from a DHCP server. The overall
purpose of the DHCP is to make it easier to administer a large network. The DHCP package includes the DHCP server and
a DHCP relay agent.
DHCP Server on LAN
DHCP Server on LAN
The DHCP Server is enabled by default. If you would like to disable it, uncheck the DHCP Server on LAN
checkbox. If you change the check mark, click the Save button to activate the change.
Add
Click the Add Subnet button which will open the table for entering the Subnet IP Address and Mask.
Edit or Delete
You can edit or delete entries by selecting the desired entries and clicking either the Edit button or Delete
button listed under Options.
DHCP Server > Fixed Addresses
The DHCP server can be made to assign a fixed IP address for a particular user by identifying the MAC address. This
binding can be made permanent by configuring the same using this screen. The same IP address would not be used for any
DHCP client with a different MAC address, even if there is no active DHCP connection with that IP address.
DHCP Server Fixed Addresses
Add Fixed Address
Enter both a MAC address and an IP address.