Multi-Tech Systems RF660 - Manual (Page 42)

Chapter 6 – RouteFinder Software
Multi-Tech Systems, Inc. RouteFinderVPN RF760/660/600VPN User Guide (PN S000323D) 42
Chapter 6 – RouteFinder Software
This chapter describes each screen and its function in the RouteFinder VPN software. The aim of the administrator in
setting the options in the software should be to let as little as possible and as much as necessary through the RouteFinder
VPN, for both incoming as well as outgoing connections.
Note: If you have not done so already, plan your network and decide which computers are to have access to which services.
This simplifies the configuration and saves you a lot of time that you would otherwise need for corrections and adjustments.
Menu Bar
The Menu bar will provide the organization of this chapter.
Important Note About Logout
Logout Closes the Software Program and Saves Settings
The best way to exit WebAdmin is to choose Logout. This will save all your current settings. The browser connection is
terminated and you are returned to the Login screen. Note that clicking the browser’s Back button will not effectively
return you to the previous menu or directory at this point.
If you close the browser while configuring the RouteFinder, the last session stays active until the end of the time-out,
and no new administrator can log in. The timeout period is set at Administration > Administrative Access > Time
Before Automatic Disconnect.