Setting up nt/2000 sam (smb) authentication – Multi-Tech Systems RF660 User Manual
Page 132
Chapter 7 – User Authentication Methods
Multi-Tech Systems, Inc. RouteFinderVPN RF760/660/600VPN User Guide (PN S000323D)
132
Setting Up NT/2000 SAM (SMB) Authentication
To setup Windows NT/2000 SAM Authentication, you will need an NT/2000 machine on your network that holds the user
accounts. This can be a domain controller (PDC) or a simple standalone server. The server has a NETBIOS name (the
NT/2000 server name) and an IP address.
Put these values in the configuration of the NT SAM method in User Authentication > RADIUS & SAM as PDC Name
and PDC address. If you have a Backup domain controller, also enter its corresponding values in User Authentication
> RADIUS & SAM.
Finally, you need the default domain to authenticate against. This will be overridden if users specify their user name as
<DOMAIN>\<USERNAME>. Otherwise, it will be filled in as the <DOMAIN> part.
Caution:
Disable the Guest account of your NT domain, since this one will allow Any username/password combination
to pass!