Multi-Tech Systems RF660 - Manual (Page 33)

Chapter 4 – Configuration Examples
Multi-Tech Systems, Inc. RouteFinderVPN RF760/660/600VPN User Guide (PN S000323D) 33
Set Packet Filters
Site A Configuration: RouteFinder VPN in the Home Office
Establish remote access filtering: click on Packet Filters > Packet Filter Rules.
1. For the Remote LAN at the branch office to access the RouteFinder’s LAN, select the following parameters for the
Remote LAN rule:
RemoteLAN – Any – Any – Accept
Note: The rule LAN – Any – Any – Accept, which displays at the bottom of the screen, was created when you
performed your initial setup using the Setup Wizard.
View
Rules by
clicking
the Show
button.
Set
Parameters
here
The rule entered in the 1 lan ANY ANY ACCEPT Edit|Delete|Move
Setup Wizard displays in
this table as shown here