Multi-Tech Systems RF660 - Manual (Page 46)

Chapter 6 – RouteFinder Software
Multi-Tech Systems, Inc. RouteFinderVPN RF760/660/600VPN User Guide (PN S000323D) 46
Administration > SNTP Client
Administration > SNTP Client
SNTP (Simple Network Time Protocol) is an internet protocol used to synchronize the clocks of computers on the network.
Clicking the SNTP Client check box enables the firewall to act as a SNTP client.
SNTP Client
Check the SNTP Client box to activate SNTP Client.
SNTP Server Address
Enter the IP address of the SNTP Server for which the firewall will contact to synchronize its clock. Then click
the Save button.