Multiquip Diamond Back SP3 Street Pro Professional Slab Saw 35 HP Wisconsin Diesel Engine SP303530 - Manual (Page 10)

MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAGE 8
MQ SP-3035 CONCRETE SAW
HAZARD SYMBOLS

Explosive Fuel
Gasoline is extremely flammable, and its vapors can cause an
explosion if ignited. DO NOT start the engine near spilled fuel or
combustible fluids. DO NOT fill the fuel tank while the engine is
running or hot. DO NOT overfill the tank, since spilled fuel could
ignite if it comes into contact with hot engine parts or sparks from
the ignition system. Store fuel in approved containers, in well-
ventilated areas and away from sparks and flames. NEVER use
fuel as a cleaning agent.
Burn Hazards
Engine components can generate extreme heat. To prevent
burns, DO NOT touch these areas while the engine is running or
immediately after operations. NEVER operate the engine with heat
shields or heat guards removed.

Rotating Parts
NEVER operate equipment with covers, or guards removed. Keep
fingers, hands, hair and clothing away from all moving parts to
prevent injury.
Accidental
Starting
ALWAYS place ON/OFF switch to the OFF position, remove key
and/or disconnect the spark plug leads before servicing the
engine, equipment, or supporting components. Ground the lead to
prevent sparks that could ignite a fire.
Lethal Exhaust
Gases
Engine exhaust gases contain poisonous carbon monoxide. This
gas is colorless and odorless, and can cause death if inhaled.
NEVER operate this equipment in a confined area or enclosed
structure that does not provide ample free flow of air.