Multiquip Diamond Back SP3 Street Pro Professional Slab Saw 35 HP Wisconsin Diesel Engine SP303530 - Manual (Page 33)

MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAGE 31
MQ SP-3035 CONCRETE SAW
Raise – Lower Controls
This saw uses a 12-volt hydraulic pump and cylinder to raise and lower the blade. Controls are
located on the speed control joystick handle.
Fig. 17 — Joystick Handle
1. To plunge the blade, depress the button on the outer end of the handle.
2. To raise the blade, depress the button on the forward side of the handle.
See the Maintenance section of this manual for a diagram of the Raise-Lower System components.
Raise Button
Plunge Button