Multiquip Diamond Back SP3 Street Pro Professional Slab Saw 35 HP Wisconsin Diesel Engine SP303530 - Manual (Page 57)

MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAGE 55
MQ SP-3035 CONCRETE SAW
Hydraulic System
The hydraulic system consists of:
Spindle Assembly (1) Hydraulic Pump (2)
Transaxle Assembly (9) Hydraulic Manifold (4)
Lift Cylinder (5) Oil Filters (3, 6)
Hydraulic Drive and Spindle Oil Reservoir (7) Lift Cylinder Reservoir (8)
Routine Maintenance
 Check oil level daily.
 Fill the reservoir to the fill line when cold.
 Level frame prior to service to get an accurate reading.
 Use 5W-30 premium grade engine oil.
 Change transaxle oil and filter every 250 hours of operation or annually.
 Change Spindle oil every 250 hours of operation or annually.
Fig. 42 — Hydraulic System Components
1
5
3
4
2
8
7
6
9