MITSUBISHI ELECTRIC PD-4225S - Manual (Page 23)

Owner’s Manual 23
External Equipment Connections External Equipment Connections
- Antenna or Cable Service without a Cable Box Connection
- For optimum picture quality, adjust antenna direction if needed.
Antenna Connection Antenna Connection
• In a poor signal area, purchase and install a signal amplifier
for better picture quality.
• If the antenna needs to be split for two TVs, include a “2-
Way Signal Splitter” in the connections.
• If the antenna is not installed properly, contact your dealer
for assistance.
Signal
Amplifier
Multi-family Dwellings/Apartments
(Connect to wall antenna socket)
Single-family Dwellings /Houses
(Connect to wall jack for outdoor antenna)
Outdoor
Antenna
Wall Antenna
Socket
VHF Antenna
UHF Antenna
RF Coaxial Wire (75 ohm)
Bronze Wire
Turn clockwise to tighten.
Bronze Wire
Be careful not to bend the bronze wire when
connecting the antenna.
• RF coaxial cable is not included with the TV.