MITSUBISHI ELECTRIC PD-4225S - Manual (Page 28)

28 Plasma TV
POWER
- The menus can be shown on the screen in the selected language. First select your language.
1. Press the MENU button and then use D / E button to select the SPECIAL menu.
2. Press the G button and then use D / E button to select Language .
3. Press the G button and then use D / E button to select your desired language.
From this point on, the on-screen menus will be shown in the language of
your choice.
4. Press the MENU button to save new setting and exit SPECIAL menu.
SPECIAL
Prev.
Language G
Button Lock
Long Life
Low power
Caption / Text
Captions
English
Español
Français
SPECIAL
MENU
Operation Operation
Menu Language Selection Menu Language Selection
T T urning on the TV urning on the TV
• CAUTION
If you connect or disconnect the Tuner Box cable to the TV, the TV will switch to the standby mode.
ON:
1. Plug the power cord into an active AC power outlet.
2. Press the (on/off) button located underneath the left side of the front panel/frame. The TV’s POWER/STANDBY
indicator turns red and the TV is switched to standby mode.
3. Press the POWER button on the remote control to turn the TV on. The POWER/STANDBY indicator will turn green
when the TV is on.
OFF:
Press the (on/off) button (underneath the front panel) to turn off the TV. The TV’s POWER/STANDBY indicator
goes off.
STANDBY ON:
Press the POWER button (on the remote control) to turn on the TV. The TV’s POWER/STANDBY indicator will light up
(green) when the TV is on.
STANDBY OFF:
Press the POWER button on the remote. The TV’s POWER/STANDBY indicator turns red and the standby mode is set.
If you don’t plan to use the TV for an extended period of time, shut it off by using the (on/off) button.