MITSUBISHI ELECTRIC PD-4225S - Manual (Page 38)

38 Plasma TV
1. Press the TV MENU button and then use D / E button to select the SCREEN menu.
2. Press the G button and then use D / E button to select Position .
3. Press the G button and then use D / E /
F / G button to adjust the position.
4. Press the ENTER button to save.
SCREEN
Prev.
Auto Adjust
Format
Zoom in/out
Position G
Manual Adjust
VCR Mode
Initialize
VGA Mode
SCREEN
MENU
SCREEN
Prev.
Auto Adjust
Format
Zoom in/out
Position
Manual Adjust G
VCR Mode
Initialize
VGA Mode
SCREEN
MENU
Manual Manual Adjust (RGB-PC mode only) Adjust (RGB-PC mode only)
Adjusting Horizontal/ V Adjusting Horizontal/ V ertical Position ertical Position
- If the image still isn’t clear after auto adjustment and especially if characters are still jittery, adjust the picture
Phase manually.
- To correct the screen size, adjust Clock .
- This function works in the following modes:
RGB-PC, RGB-DTV (480p,720p,1080i), DVI-DTV (480p,720p,1080i),
COMPONENT (480p,720p,1080i).
1. Press the TV MENU button and then use D / E button to select the SCREEN menu.
2. Press the G button and then use D / E button to select Manual Adjust .
3. Press the G button and then use D / E button to to select Phase or Clock .
4. Use the F / G button to make appropriate adjustments.
• The Phase adjustment range is 0 ~ 31.
• The Clock adjustment range is -50 ~ +50.
5. Press the ENTER button to save.
Phase 0
Clock 0
SCREEN
Prev.
Auto Adjust
Format
Zoom in/out
Position
Manual Adjust
VCR Mode G
Initialize
YNR
SCREEN
MENU
VCR Mode (TV VCR Mode (TV , V , V ideo(Exp.), V ideo(Exp.), V ideo, S-V ideo, S-V ideo and Component 480i mode only) ideo and Component 480i mode only)
- Use this function to correct jittering or picture instability while viewing a video tape.
1. Press the TV MENU button and then use D / E button to select the SCREEN menu.
2. Press the G button and then use D / E button to select VCR Mode .
3. Press the G button and then use D / E button to select Off or On .
• Select the On option if watching a VCR.
• Select the Off option for other equipment. (Except VCR)
4. Press the ENTER button to save.
Off
On
1. Press the MENU button and then use D / E button to select the SCREEN menu.
2. Press the G button and then use D / E button to select Initialize .
3. Press the G button.
• You can reset Zoom in/out, Manual Adjust, Position, PIP size, PIP position and
sub picture size.
4. Press the HOME button to exit.
Initializing (Reset to original factory value) Initializing (Reset to original factory value)
- This function operates in every mode.
- Use the Initialize option to reset the adjusted settings.
SCREEN
Prev.
Auto Adjust
Format
Zoom in/out
Position
Manual Adjust
VCR Mode
Initialize G
YNR
To set
SCREEN
MENU
D
F G
E