MITSUBISHI ELECTRIC PD-4225S - Manual (Page 46)

46 Plasma TV
No output from one of
the speakers
• Adjust BALANCE in the SOUND menu. (Refer to p.31)
Unusual sound from
inside the TV
• A change in ambient humidity or temperature may result in an unusual noise
when the TV is turned on or off and does not indicate a fault with the TV.
Lines or streaks
in picture
• Check antenna (Change the direction of the antenna).
Poor stereo sound
• Check the kind of input signal and select Mono , Stereo or SAP with the MTS
button.
Auto programming
doesn’t stop
• Press the ENTER button again.
T T roubleshooting Checklist continued roubleshooting Checklist continued
Picture moves
intermittently around
the screen
• Is ORBITER ON? Default setting for ORBITER is ON. In this mode, picture
moves intermittently around the screen. See page 34 to shut off ORBITER.