MITSUBISHI ELECTRIC PD-4225S - Manual (Page 39)

Owner’s Manual 39
SCREEN
Prev.
Auto Adjust
Format
Zoom in/out
Position
Manual Adjust
VCR Mode
Initialize
VGA Mode G
640x480
848x480
852x480
SCREEN
MENU
SCREEN
Prev.
Auto Adjust
Format
Zoom in/out
Position
Manual Adjust
VCR Mode
Initialize
YNR G
On
Off
SCREEN
MENU
Selecting W Selecting W ide VGA ide VGA mode (RGB-PC, DVI-PC mode only) mode (RGB-PC, DVI-PC mode only)
- To see a normal picture, match the resolution of RGB mode and selection of VGA mode.
1. Press the TV MENU button and then use D / E button to select the SCREEN menu.
2. Press the G button and then use D / E button to select VGA mode .
3. Press the G button and then use D / E button to select the desired VGA resolution.
4. Press the ENTER button to save.
- Use YNR to reduce the picture noise that may appear on the screen.
Luminance Noise Reduction (TV Luminance Noise Reduction (TV , V , V ideo(Exp.), V ideo(Exp.), V ideo, S-V ideo, S-V ideo and Component 480i modes only) ideo and Component 480i modes only)
1. Press the TV MENU button and then use D / E button to select the SCREEN menu.
2. Press the G button and then use D / E button to select YNR .
3. Press the G button and then use D / E button to select On or Off .
4. Press the ENTER button to save.
Screen Menu Options continued Screen Menu Options continued