Multi-Tech Systems MT2834ZPX - Manual (Page 30)

30
MT2834ZPX Owner's Manual
COMMAND: I9
VALUES: N/A
DEFAULT: Read Only Command
DESCRIPTION:
The I9 command is a query to display this modem's
characteristics when operating within Windows 95.
Entering
ATI9<cr> invokes ZPX 28800 FAX CT
on your video monitor.
(The response to the query reveals that this modem is a
ZPX, 28.8K, FAX and Class Two capable device.)
COMMAND: L
VALUES: 5, 6, 7, 8, 9, 10 and 11
DEFAULT: Read Only Command
DESCRIPTION:
L5 lists all current operating parameters.
L6 lists all current S-Register values.
L7 lists additional parameters.
L8 lists current on-line diagnostics.
L9 displays Signal Strength Information.
L10 displays Signal to Noise Ratio
Information.
L11 displays Noise Information.
COMMAND: #Ln
VALUES: n = 0 thru 3
DEFAULT: #L0
DESCRIPTION:
#L0 selects modems to negotiate V.42 Mode.
#L1 selects MNP on and LAP-M off.
#L2 selects LAP-M on and MNP off.
#L3 selects no detection phase, go directly to LAP-M.