Result codes – Multi-Tech Systems MT2834ZPX User Manual
Page 46
46
MT2834ZPX Owner's Manual
Result Codes
The MT2834ZPX Command mode provides you with several
responses, or
“Result Codes”, that can aid you in Command mode
operation. These Result Codes are displayed on your video monitor.
AT&Q0 selects Multi-Tech responses with Reliable/LAP-M/
Compressed modifiers. The terse result code for
CONNECT 2400 is
9.
AT&Q1 selects Standard AT command set responses. The terse
result code for
CONNECT 2400 is 10. The following tables list result
codes generated by the
&Q command.
Table 4-2 &Q0 "Multi-Tech" Result Codes
TERSE
VERBOSE
0
OK
1
CONNECT
2
RING
3
NO CARRIER
4
ERROR
5*
CONNECT 1200
6
NO DIALTONE
7
BUSY
8
NO ANSWER
9*
CONNECT 2400
11*
CONNECT 4800
12*
CONNECT 9600
13*
CONNECT 14400
19*
CONNECT 19200
21*
CONNECT 21600
24*
CONNECT 24000
26*
CONNECT 26400
28*
CONNECT 28800
31*
CONNECT 31200
33*
CONNECT 33600
* With MNP error correction on, RELIABLE (or R) is added to these
result codes. With LAP-M error correction on, LAP-M (or L) is added
to these result codes. With data compression on, COMPRESSED (or
C) is added. (Note these
"Extended" Result Codes are displayed when
your modem is set-up to do so with an X1, X2, X3, or X4 command.)