MSI ATX Motherboard G52-MA00362 - Manual (Page 19)

Hardware Setup
2-7
Memory Installation Procedures
You can install memory modules in any combination as follows:
Installing DIMM Modules
1. The DIMM slot has 2 Notch Keys “VOLT and DRAM”, so the
DIMM memory module can only fit in one direction.
2. Insert the DIMM memory module vertically into the DIMM slot.
Then push it in.
3. The plastic clip at the side of the DIMM slot will automatically
close.
Socket
Socket 1
(Bank0 & Bank1)
Socket 2
(Bank2 & Bank3)
Socket 3
(Bank4 & Bank5)
Memory Module
64MB, 128MB,
256MB, 512MB, 1GB
64MB, 128MB,
256MB, 512MB, 1GB
64MB, 128MB,
256MB, 512MB, 1GB
Total Memory
64MB ~ 1GB
64MB ~ 1GB
64MB ~ 1GB
64MB ~ 3GB Total System Memory
Note: As 845 chipset does not properly support the PC100 memory, it
is strongly recommended to install PC133 DIMMs for the better system
performance and stability. We do not guarantee the system stability when
installing PC100 DIMMs.
Front View Rear View
VOLT DRAM