MSI ATX Motherboard G52-MA00362 - Manual (Page 34)

Chapter 2
2-22
Wake On Ring/Wake On LAN Connectors: JMDM1/JWOL1
Wake On Ring (JMDM1) connector allows you to connect to a
modem card with Wake On Ring function; Wake On LAN (JWOL1) con-
nector allows you to connect to a LAN card with Wake On LAN function.
The two connectors provide system the feature to boot up when a signal
is received through the modem card/local area network.
Note: To be able to use this function, you need a power supply that
provide enough power for this feature. (Power supply with 750mA 5V Stand-
by)
PIN SIGNAL
1 N C
2 GND
3 MDM_WAKEUP
4 N C
5 5VSB
Note: Modem wake-up signal
is active “low”.
PIN SIGNAL
1 5VSB
2 GND
3 MP_WAKEUP
Note: LAN wake-up signal
is active “high”.
5 1
JMDM1
1
3
JWOL1