MSI ATX Motherboard G52-MA00362 - Manual (Page 33)

Hardware Setup
2-21
Power Saving LED Connector: JGL1
JGL1 is connected to a power saving LED. There are two types of
LED that you can use: 3-pin or 2-pin (ACPI request) LED. If connected to
a dual color LED, the LED light is green when system in turned on, and
turns to orange color while entering the sleep state. For single color LED,
the LED is lit when system is on, and blinks during the sleep state.
Green: Full-On Mode Dual Color
Orange: Sleep Mode
3-Pin LED 2-Pin LED
1 3
Green Color
Orange Color
Green Color
Orange Color
1 3
JGL1
PLED1
Suspend LED
GND
1