MSI ATX Motherboard G52-MA00362 User Manual
Page 69
Chapter 3
3-26
Power Again
This item determines how the system will power on after a power failure.
Power Off Leaves the computer in the power off state
Power On
Reboots the computer
Last State
Restores the system to the state before power failure
Sleep State LED
This item determines which state the Power LED will use. The settings
are [Single], [Dual] and [Blinking]. When set to [Blinking], the power
LED will blink when the system enters the suspend mode. When set to
[Dual], the power LED will change its color. Choose the [Single] and the
power LED will always remain light up.
<Reload Global Timer Events>
Reload Global Timer events are I/O events whose occurrence can pre-
vent the system from entering a power saving mode or can awaken the
system from such a mode. In effect, the system remains alert for anything
which occurs to a device which is configured as Enabled , even when the
system is in a power down mode.
Primary Master IDE
Primary Slave IDE
Secondary Master IDE
Secondary Slave IDE
FDC/LPT/COM Ports