MSI ATX Motherboard G52-MA00362 - Manual (Page 45)

Chapter 3
3-2
Power on the computer. When the below message appears briefly
at the bottom of the screen during the POST (Power On Self Test), press
<Del> key or simultaneously press <Ctrl>, <Alt>, and <Esc> keys to
enter Setup.
TO ENTER SETUP BEFORE BOOT, PRESS <CTRL-ALT-ESC>
OR <DEL> KEY
If the message disappears before you respond and you still
wish to enter Setup, restart the system by turning it OFF then On or
pressing the RESET button to try again. You may also restart by
simultaneously pressing <Ctrl>, <Alt>, and <Delete> keys.
Control Keys
Move to the previous item
Move to the next item
Move to the item in the left hand
Move to the item in the right hand
Select the item
Jump to the Exit menu or return to the Main menu from a submenu
Increase the numeric value or make changes
Decrease the numeric value or make changes
General help, only for StatusPage Setup Menu and Option Page
Setup Menu
Restore the previous CMOS value from CMOS, only for Option
Page Setup Menu
Load the default CMOS value from the Fail-Safe default table,
only for Option Page Setup Menu
Load Optimized defaults
Save all the CMOS changes and exit
< Enter >
< Esc >
< +/PU >
< -/PD >
< F1 >
< F5 >
< F6 >
< F7 >
< F10 >
Entering Setup
<
↑
>
<
↓
>
< ← >
< → >